Made to Measure, Frameless, Glass Shower Doors

Glass shower doors are without doubt one of the most important aspects of modern shower
design. If nothing else they create an entrance to a shower which is undoubtably more attractive
than the old traditional shower curtain but they can still disguise the person in the shower just as
effectively via sandblasting or acid etching and they do a far better job of keeping the water inside
the shower base or bath.

As we've stated throughout the site (and hope to acheive effectively) our main goal is to make it
simple when choosing and ultimately aquiring your very own made to measure shower door. We
don't carry any off-the-shelf stock products so everything is a bespoke fabrication based on your
sizes and design preferences, so any area you wish to fill, with either a single or double shower door combination, can be acheived.

Below are a number of helpful ideas and price examples to assist your design but as we point out
repeatedly we are a very keenly priced bespoke fabricator so email your basic dimensions to sales@bathingbliss.co.uk or call us on either 0845 0450336 or 01642 648444 and we'll provide
quotations along with any technical help or assistance you may require in the search for you very own made to measure frameless shower door.
The simplest of door configurations, the single door. The door would be supplied with the
hinges, handles and necessary seals.

Example Prices (include vat, exclude delivery)
Please bear in mind that the prices below are for guide purpose only as we are a bespoke, made-to-measure fabricator and can make any size door required

600mm x 1900mm ...£360.00 in 8mm thickness,
700mm x 1900mm ...£380.00 in 8mm thickness,
850mm x 1900mm ...£450.00 in 8mm thickness,

600mm x 1900mm ...£410.00 in 10mm thickness,
700mm x 1900mm ...£430.00 in 10mm thickness,
850mm x 1900mm ...£500.00 in 10mm thickness,

Optional Extras
Ritec Clearsheild ...£40 per metre squared
'Low Iron Glass' (extra clear glass) add 10% to cost of door
Bronze or Grey Tinted Glass...POA.

A slight variation on the single door option, where space is of the essence and your enclosure
size won't allow the door to open at full swing so a smaller fixed panel is used to compensate.
The door would be supplied with the hinges, handles (if required) and necessary seals.
Example Prices (include vat, exclude delivery)
Below are some further example prices but once again please use them only as a guide as we are a bespoke fabricator and can make any size door and panel combination required.

Size of opening - 800mm wide, comprising of door size
600mm x 1900mm, and panel size 200mm x 1900mm
...£470.00 in 8mm thickness, ...£520.00 in 10mm thickness

Size of opening - 900mm wide, comprising of door size
700mm x 1900mm, and panel size 200mm x 1900mm
...£490.00 in 8mm thickness, ...£560.00 in 10mm thickness

Size of opening - 1000mm wide, comprising of door size
700mm x 1900mm, and panel size 300mm x 1900mm
...£520.00 in 8mm thickness, ...£600.00 in 10mm thickness

Optional Extras
Horizontal or Vertical Support Bar ...£55.00
Ritec Clearsheild ...£40 per metre squared
‘Low Iron Glass’ (extra clear glass) add 10% to door/panel cost
Bronze or Grey Tinted Glass...POA.
This is basically the same as the single door option above but
as the name suggests with two doors.

This solution is often applied if your shower tray is large and
you don't want to utilise the fixed panel option (as seen in our
shower enclosures section) although it is sometimes used if
space is limited and you don't like the inline panel option above.

As above the doors would be supplied with all necessary fixings etc.. and in order to gain a basic idea of price simply double the price of the single door option (or give us a call on 01642 648444 or email sales@bathingbliss.co.uk).
Should you wish to add some vanity screening to your
made to measure shower door, you can apply a sandblasted
finish. Below are some example options but you can also add
a design of your own if you feel the creative urge.

All sanblasting is priced on application but a rule of thumb to help gauge cost is the simpler the design, the lower the price.

We hope this page provides enough details to help you both design and gain some idea of cost for your own made to measure
shower doors.

At risk of annoyingly repeating ourselves though, once again please do bear in mind the fact that we are a bespoke fabricator of
shower doors and everything we provide is made to measure.

The prices and sizes on this page are there to provide a guide for pricing but please email us with your own sizes to
sales@bathingbliss.co.uk or give us a call on 0845 0450336 or 01642 648444 and chat through your designs.

We can provide prices over the phone and assist in any way possible to help you design and ultimately aquire your very own
glass shower door.
Is your shower screen/door requirements
not on this page? If not please have a look
at one of our other sections which will
undoubtedly have the door/panel orientation
you’re looking for.

Click on one of the sections to the right
which you think best suits your design.
home - sitemap - contact us