Shower Door and Enclosure Water Seals and Wipes |
|||||||
Below is our most common water seal range. It encompasses a selection of seals for virtually all design solutions, from basic door base seals to multi purpose angle door jambs and (should they be a requirement) magnetic profiles. Should you not
find a seal below which you think is relevant to your door or enclosure though, or if you require any further details or clarificiation of any technical aspects regarding our seals, please don't hesitate giving us a call on either 0845 0450336 or 01642 648444. You could also email should you wish to on sales@bathingbliss.co.uk |
|||||||
Application
Size Glass thickness |
- Snaps simply onto the bottom of the door with two soft wipes creating a seal - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for 8mm, 10mm and 12mm thickness glass |
||||||
Application Size Glass thickness |
- Snaps simply onto the side of the door with |
||||||
Application Size Glass thickness |
- Snaps simply onto either fixed panel or door creating a hard seal to close against - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for 8mm, 10mm and 12mm thickness glass |
||||||
Application Size Glass thickness |
- Snaps simply onto either fixed panel or door at hinge or strike side creating a soft seal to close/open against - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for 8mm, 10mm and 12mm thickness glass |
||||||
Application Size Glass thickness |
- Snaps simply onto either fixed panel or door creating a very soft seal to close against - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for 8mm thick glass only. If a 10mm version is required please call. |
||||||
Application Size Glass thickness |
- Adhered to wall or glass using our clear very Hi-Bond Tape to create a strike jamb - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for 8mm, 10mm and 12mm thickness glass |
||||||
Application Size Glass thickness |
- Adhered to wall or glass using our clear very Hi-Bond Tape compressing when closed - Stock lengths of 2.49m (98”) to be cut to size on site as required - Is available for most glass thicknesses but the bubble thickness has three options depending on requirements. Call for details. |
||||||
Below is our range of magnetic seals. There are a number of options for these seals which when used in conjunction with each other provide a magnetic closing system for all design possibilities. |
|||||||
Application
Size Glass thickness |
- Snaps simply onto the side of the door or panel with the magnet creating a tight seal - Stock lengths of 1.98m (78”) to be cut to size on site as required - Available for 8mm or 10mm thickness glass only |
||||||
Angle Profiles Required Configuration |
- 180 degrees glass to glass - PMA10 + PMB10 - Door opens in one direction only |
||||||
Angle Profiles Required Configuration |
- 180 degrees glass to glass - PMC10 + PMC10 - Door opens in both directions (inwards and outwards) |
||||||
Angle Profiles Required Configuration |
- 135 degrees glass to glass - PMC10 + PMB10 - Door opens outwards only |
||||||
Angle Profiles Required Configuration |
- 90 degrees glass to glass - PMA10 + PMB10 - Door opens outwards only |
||||||
home - sitemap - contact us |
|||||||